• Camera Assembly – GigE Digital progressive scan camera 1280×1024, precision ground, 10:1 zoom lens to include close-up +5 achromatic dioptre attachment enabling viewing area of, 120x110mm (Standard) approx, Minimum 15 x 10mm.
• Monitor – 22″ Widescreen  TFT Touchscreen monitor
• Dual strobe assemblies – Our own advanced design, provides illumination and reliability. The strobes are enclosed within the camera case which sits 5mm away from the web to eliminate the presence of ambient light.
• One touch camera controls.
• Windows embedded operating system – Solid state hard drive, fanless intel CPU
• Operator Controls – Tectonic bespoke software has been designed to give the operator instant reflex action for fast correction of faults and, therefore, significant reduction in waste.
• Split-Screen – Tectonic provide a “like-for-like” split-screen.
• Operator Responsive
• Traverse – 500mm supplied as standard. However, any length of traverse can be supplied.
• Colour monitoring – Unlimited colour monitoring tools with deviations calculated in a relative value. Alarm sends an error notification alerting the operator
• Touchscreen Interface
• Constant scan – Allows the web to be viewed automatically. The user determines how many images are captured both along the web width and repeat length.
• User defined web width – A left and right marker may be entered to define the web width for use with constant scan so the Panther only scans the required web width.
• Programable positioning – Allows the operator to choose at random in variable zoom settings and hold in memory specific areas of interest. This then displays each position consecutively.

Options

• Motorized or manual backstrobe – For back to front registration.
• Additional viewing monitors
• Additional cameras – For reverse side viewing.
• Special lighting – For UV inks or cold seal.
• Signal to tagging machine.
• Gear and master – Second gear sensor fitted to the press so saved positions are not lost when you change reels